New on the Market: Universal Machinery Introduces Military Band Notcher
A military notcher or groover notcher notches a band notch along the length of a board.
Date Posted: 4/1/2013
††††††††††††††† Everybody in the pallet industry is familiar with notching stringers to allow fork lifts to enter from the side through the stringers. Some may not be familiar with military band notches. A military notcher or groover notcher notches a band notch along the length of a board.† The width and depth of the notch can be adjusted to the customerís specification.
††††††††††††††† Universal Machinery Sales has just released a new military band notcher because it has had a number of customers recently request this kind of a machine. A typical band notch is Ĺ-inch deep and 1Ĺ-inch wide, but depth, width, and speed can be set to a customerís specification. Universalís military band notcher is available in single or double cuts.
††††††††††††††† A band notch is typically used to hold down products during shipping. The banding lies in the notch and encircles the products being shipped.
††††††††††††††† This low maintenance machine features a 10 hp motor/starter set for three phase or single phase electricity. Indexable replaceable tipped cutters are adjustable to the center notch. The notcher has a dust chute to match your specification.
††††††††††††††† For more details on this machine and how it can fit your notching needs, contact Mona Tracy at Universal Machinery Sales at 855/298-8890.
Do you want reprints or a copyright license for this article? Click here
Research and connect with suppliers mentioned in this article using our FREE ZIP Online service.